Step 1: Goto http://www.dmr-marc.net/contact.html and request a radio ID, enter
your radio name, [this can be anything you like] & your assigned radio ID.
Also make sure under view menu in your software, you have expert checked.

 

Step 2: Create two new digital contacts with group call ID 1 & 2, I labeled mine DMR-MARC1 & DMR-MARC2

Step 3: Create two RX Group Lists and label them DMR-MARC1 and DMR-MARC2
then move the appropriate contact into it.

 

Step 4: Create a new digital channel for the local time slot, I named mine KDØCJS, set up Color Code [2],
Repeater Slot [2] & check Compressed UDP Data Header if your software allows it.

Scroll down and set RX & TX Frequency, Contact Name [All Call], Admit Criteria [Color Code Free],
In Call Criteria [Follow Admit Criteria] & check Enhanced Channel Access if your software allows it.

Step 5: Create a new digital channel for the DMR-MARC network time slot, I named mine "KDØCJS DMR-MARC".
Color Code [2], Repeater Slot [1], check IP Site Connect & Compressed UDP Data Header if your software allows it.
Also set Messaging Delay to 90 ms and make sure ARS is unchecked or disabled.

Scroll down and set RX & TX Frequency, RX Group List [DMR-MARC1], Contact Name [DMR-MARC1],
TOT (sec) [180], Admit Criteria [Color Code Free], In Call Criteria [Follow Admit Criteria]
Also check Enhanced Channel Access if your software allows it.

You should now be good to go!